Biobond is an authorized applicator of expanding polyurethane foam insulation and polyurea coating products for residential and commercial construction. Expanding foam can be applied to almost any building substrait including: wood, steel and concrete. Foam insulation can be sprayed below roofing, underneath floors, throughout attics, inside crawl spaces and on duct work.

The following spray foam insulation services are offered throughout Colorado:

ENERGY ANALYSIS AND CONSULTATION

Biobond works with professional energy efficient engineers to create efficient designs for each individual project. From the plans of your home, an energy analysis and an accurate heat loss calculation can be created which will enable you to see the energy savings before your home is built. Also the analysis and design specification will guide the mechanical contractor to properly size your heating, ventilating, and cooling systems, which will most likely save you more money.

CLOSED CELL FOAM APPLICATION

For maximum thermal efficiency and air sealing, Biobond installs a closed cell foam with an effective R-Value of R-7 per inch. Closed cell foam is the highest performing insulation available because it seals air infiltration, has the highest R-Value available and is resistant to moisture movement.

Closed cell foam can be sprayed almost anywhere including under a roof deck in cathedral ceilings, on concrete and in walls cavities.

OPEN CELL FOAM APPLICATION

Affordable Half pound open cell foam has an effective R-Value of 3.7 per inch. This product is more breathable to vapor diffusion, therefore will not entrap moisture. However Half pound foam has superior air sealing properties and costs much less than closed cell foams. A vapor barrier may or may not be needed with the use of Half pound foam.

Half pound foam is sprayed in between the wall studs and expands to fill each cavity. After the cavity is full, the foam is cut flush with the studs, then it is ready for drywall or other finishings.

SOUND PROOFING

Half pound foam's semi-open cell structure performs by absorbing sound waves. It is applied in-between walls of adjacent rooms to create sound absorption. Perfect for loud media rooms, bathrooms and laundry rooms or under floors of multi level buildings.

A minimum of 3" must be installed to achieve a STC (Sound Transmission Class) of 37 and 5.5" to achieve STC of 67.

IGNITION BARRIER PROTECTION

Where ever needed or specified by code an ignition barrier paint can be sprayed on foam or other materials to reduce the risk of fire. When applied it performs as a 15 minute fire barrier.

Contact us, if you would like to find out more information on
Biobond's services or foam insulation.